Released October 31, 2019
Added support for BricsCAD V20.
Released October 8, 2019
Fixed the “Insert Mask” command to work correctly with non-world UCSs.
Released September 26, 2019
Changed calculation display to require foot-candle levels or contours to be displayed.
Fixed error starting a new project.
Fixed errors in floating licenses caused by incorrect system configurations.
Released July 9, 2019
Photometric contours can be assigned individual layers.
Released April 22, 2019
Added support for AutoCAD 2020.
Released January 23, 2019
Fixed BricsCAD version to work in 64-bit BricsCAD again.
Released December 13, 2018
Fixed crash in AutoCAD Civil 3D when using the Quick Properties feature.
Released December 10, 2018
Fixed errors with floating licenses.
Added support for BricsCAD v19.
Released October 22, 2018
Improved warning messages that are displayed when there are licensing problems.
Released September 24, 2018
LED IES File Scaling: IES files are used to calculate point-by-point photometrics. Standard IES files include information about the lumens used when creating the IES file. The lumens value in the light fixture schedule can be used together with the IES lumens value to scale the IES file out put.
IES files for LED fixtures typically do not include lumens information. The lack of this information makes it impossible to scale the output based upon the lumens in the light fixture schedule.
There is a new Scale Factor value you can set in the light fixture schedule for these situations. The light output will be multiplied by the scale factor you provide.
Previously you had to set the Lamp Depreciation to a value greater than 1 to workaround this limitation in the IES files.
Average Foot-candle Uniformity Ratios: The photometric schedule can include three new uniformity ratios, average foot-candles to maximum foot-candles, maximum foot-candles to average foot-candles, and minimum foot-candles to average foot-candles.
Released January 25, 2018
Added support for BricsCAD V18
Added support for ribbons in BricsCAD
Released September 19, 2017
Fixed error in “Insert Light Fixture Project Schedule” that caused the schedule to not be automatically inserted at the current location.
Released March 21, 2017
Added support for AutoCAD 2018.
Fixed update of files when using a network install with BricsCAD.
Released August 3, 2016
Improved error messages when foot-candle levels are 0 to provide better suggestions for fixing the problem.
Released June 9, 2016
Added Array Light Fixture commands.
Released March 21, 2016
Added support for AutoCAD 2017.
Released March 14, 2016
Added support for BricsCAD V16.
Dropped support for BricsCAD V15.
Dropped support for changes and improvements on AutoCAD 2004, 2005, and 2006.
Download the installer for the last release that supports AutoCAD 2004, 2005, and 2006 here.
Released April, 2014
Released August, 2012